IR Linear 128+1 Array in Parker Kittiwake ATR Analyser
ezPyro SMD Flame Detector in a Trueyes TF100 flame detection module
The Trueyes TF100 flame detection module – the world’s smallest pyroelectric flame detection module – uses a single ezPyro SMD flame sensor. The plug-in module is designed for CCTV manufacturers and other device manufacturers. Detector range 42m under certification conditions without extra windows.
Analogue TO39 CO2 detectors in medical devices
Prior Care (China) uses a Pyreos TO39 Dual CO2 detector in its mainstream and sidestream point-of-care CO2 measurement systems for anesthesia.
Analogue TO39 CO2 detectors in battery powered capnography devices
Prior Care (China) uses a Pyreos TO39 Dual CO2 detector in handheld battery powered capnography product. The WHO/WFSA (World Health Organisation / World Federation of Societies of Anaesthesiologists) has put CO2 monitoring in their recommendations for safe anaesthesia as “Highly Recommended”, the strongest category. This is now filtering through to national associations that can set legally binding standards.
Two quad analogue TO39 detectors in medical anesthesia OEM sensor
ITEC Engineering LLC (USA) uses two quad Pyreos TO39 detectors in its sidestream medical OEM module for measuring anaesthetic gas concentration.
Analogue dual TO39 detector in veterinary anaesthesia OEM sensor
ITEC Engineering LLC (USA) uses a dual Pyreos TO39 detector in its sidestream veterinary OEM module for measuring anaesthetic gas concentration.
Axetris emitter technology uses Pyreos 128 pixel linear array for liquid measurements
Spectroscopy using Pyreos technology based on ATR, that provides an affordable and portable solution to food producers, letting them control the quality of their products.
Pyreos has helped us to save millions of dollars in new product development costs and to bring a highly innovative new product to market in a much faster timeframe than otherwise possible.
The new measurement product is strategically important to our business and we could not have launched this new product without the expertise, knowhow and commitment of the Pyreos team.
I am familiar with analog IR detection systems and I was able to develop a product from the ezPyro range using the documentation, with no support, in just two months! This saved me money and allowed us to launch earlier.
The API for the ezPyro ecosystem of SMDs and TO39s was exactly what I needed. We were able to protype quickly and move rapidly into production.
As an early adopter firmly convinced from experience of the superiority of your products as they apply to NDIR and LVF spectrometry applications, I would be happy to recommend Pyreos. This is an opinion formulated after many tests and trials with comparisons to products from other vendors.
We have been using Pyreos quad, dual and single detectors in our medical, veterinary and lab test gas analyzers for more than 6 years. The features which we value a lot are:
- High sensitivity and very good signal to noise ratio. This allows us to construct a low noise front end electronics and signal processing combination, resulting in a stable gas analyzer.
- Low sensitivity to temperature shock, which significantly simplifies the temperature compensation of the sensor device. The competitive devices suffer from temperature shock; the signal starts to drift until the temperature stabilizes. This requires building a temperature conservative environment for them to operate in. Pyreos devices are not sensitive to such shocks, and the mechanical design of the gas analyzer is therefore simplified.
In general, we would highly recommend Pyreos detectors for all kinds of gas measurements.
The partnership with Pyreos has allowed [us] to accelerate our innovation agenda.